01 · Get started
Charge first, then set the date and time.
The package includes the clock and a USB cable. The display has a simple and a detailed layout. Detailed mode can show date, weekday, time, temperature, humidity, and a weather icon.
- Charge with the supplied USB cable and a suitable USB power source.
- Long-press SET, then adjust year, month, day, hour, minute, and temperature unit in sequence.
- Use +/− for the flashing item. Completing the sequence, or long-pressing SET, saves and exits.
02 · Controls and features
Short and long presses perform different actions.
Set the hour, minute, and state for A1, A2, and A3. on enables an alarm; -- disables it. Adjust with +/− and long-press SET to save.
Set year, month, day, hour, minute, and °C/°F. The active item flashes.
Switch between 12- and 24-hour display.
Switch between simple and detailed display layouts.
Turn the master alarm state on or off. ALARM at the lower right confirms that alarms are enabled.
Alarm not sounding?
Confirm that the chosen A1/A2/A3 is set to on, then check the master alarm state. Setting a time while leaving -- selected does not enable it.
03 · Reset and usage notes
Reset an unresponsive clock; stop use after glass damage.
- Inspect the screen before removing its protective film. The current website return and warranty policies apply.
- If the clock stops responding, gently press the reset button through the hole on the back of the base with a thin, blunt tool.
- If the battery reading is clearly inaccurate, charge fully for about one hour and then reset once to recalibrate the display.
- Do not open the case or allow liquid into the base. Stop use after glass breakage, unusual heating, or battery swelling.