01 · Get started
Add water first, then connect the supplied 24V adapter.
Tank720 ml
Rated input24V ⎓ 500mA
Maximum mistabout 120 ml/h
- Disconnect power, open the top cover, and slowly add purified or distilled water.
- Keep the water below the air outlet. Overfilling can stop mist, cause leakage, or damage the circuit.
- Close the cover, place the unit on a dry level surface, then connect the original 24V adapter.
- Short-press Power to cycle
H1high,H2medium,H3low, and Off.
Use the separate aroma box when supplied.Add 2–3 drops of water-soluble fragrance to the aroma box. Do not put essential oil directly in the tank unless the exact product label explicitly permits it.
02 · Controls and features
Power, Display, and Light each have a clear role.
Power
Short press: H1 → H2 → H3 → Off. It lowers the value while setting time.
Display
Short press: switch among time, humidity, and screen off. Long press: enter clock setting. Short presses advance and finally save.
Light
Short press: custom color, red, blue, warm-white night light, and gradient. It raises the value while setting time.
Light long
When clr appears, colors cycle automatically. Release the button on the color you want.
Set the clock
- Long-press Display until the hour flashes.
- Use Light to increase and Power to decrease.
- Short-press Display to move to minutes, then press again to save and exit.
03 · Usage notes
Disconnect power before filling or draining, and keep water away from the air outlet.
- Disconnect power before filling or draining. Never immerse the unit or adapter.
- Pour remaining water slowly from the side or back, away from the air outlet, buttons, and power connector.
- Condensation can form around the unit on high mist in a humid room. Lower the level, dry the surface, and avoid over-humidifying.
- If there is no mist, first check that water is below the air outlet, then check power and the selected mist level. Contact support if the problem continues.